1/7 T405Q-600 ? april 2004 - ed: 1 sensitive 4q 4a triac symbol parameter value unit i t(rms) rms on-state current (full sine wave) dpak / ipak tc= 110c 4 a i tsm non repetitive surge peak on-state current (full cycle, t j initial = 25c ) f = 50hz t = 20ms 35 a f = 60hz t = 16.7ms 38 i 2 ti 2 t value for fusing tp = 10 ms 6 a 2 s di/dt critical rate of rise of on-state current i g =2xi gt ,tr 100ns repetitive f = 100 hz 50 a/s i gm peak gate current tp = 20s tj = 125c 4 a p g(av) average gate power dissipation tj = 125c 0.5 w t stg t j storage junction temperature range operating junction temperature range -40to+150 -40to+125 c absolute maximum ratings symbol value unit i t(rms) 4a v drm /v rrm 600 v i gt 5ma main features T405Q-600b-tr dpak a1 a2 a2 g g a2 a1 the T405Q-600b-tr and the T405Q-600h 4 quadrants sensitive triacs are intended in gen- eral purpose applications where high surge cur- rent capability is required, such as irrigation systems. these triacs feature a gate current ca- pability sensitivities of 5ma. description a2 a1 a2 g T405Q-600h ipak
T405Q-600 2/7 symbol parameter value unit rth(j-c) junction to case (ac) 3 c/w rth(j-a) junction to ambient s = 0.5 cm2 dpak 70 c/w ipak 100 thermal resistances symbol test conditions quadrant t405q unit i gt (1) v d =12v r l =30 ? i-ii-iii iv max. 5 10 ma v gt all max. 1.3 v v gd v d =v drm r l =3.3k ? tj = 125c all min. 0.2 v i h (2) i t = 100ma max. 10 ma i l i g = 1.2i gt i-iii-iv ii max. 10 15 ma dv/dt (2) v d =67% v drm gate open tj = 125c min. 10 v/s (dv/dt)c (2) (di/dt)c = 1.8 a/ms tj = 125c min. 2 v/s electrical characteristics (tj = 25c, unless otherwise specified) symbol test conditions value unit v tm (2) i tm = 5 a tp = 380s tj = 25c max. 1.5 v v to (2) threshold voltage tj = 125c max. 0.85 v r d (2) dynamic resistance tj = 125c max. 100 m ? i drm i rrm v drm =v rrm tj = 25c tj = 125c max 5 1 a ma note 1 : minimum igt is guaranted at 5% of igt max. note 2 : for both polarities of a2 referenced to a1. static characteristics part number voltage sensitivity type package T405Q-600b-tr 600v 5 ma sensitive dpak T405Q-600h 600v 5 ma sensitive ipak product selector
T405Q-600 3/7 t 4 05 q - 600 b (-tr) triac series current: 4a sensitivity: 5ma (q1-q2-q3) 10ma (q4) number of quadrants: 4 voltage: 600v package: b: dpak h: ipak packing mode: blank: tube -tr: dpak tape &reel ordering information part number marking weight base quantity packing mode T405Q-600b-tr t405q600 0.3 g 2500 tape & reel T405Q-600h t405q600 0.4 g 75 tube other information
T405Q-600 4/7 0 1 2 3 4 5 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 i(a) t(rms) =180 p(w) 180 fig. 1: maximum power dissipation versus rms on-state current. 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 0 25 50 75 100 125 tc(c) =180 i(a) t(rms) fig. 2: rms on-state current versus case tem - perature. 1.e-03 1.e-02 1.e-01 1.e+00 1.e-03 1.e-02 1.e-01 1.e+00 1.e+01 1.e+02 1.e+03 t (s) p z th(j-c) z th(j-c) k=[zth/rth] fig. 3: relative variation of thermal impedance versus pulse duration. 1 10 100 012345678910 v(v) tm t j =25c t j =125c t j max. : v to = 0.85 v r d = 100 m ? i(a) tm fig. 4: on-state characteristics (maximum val - ues). 1 10 100 1000 0.01 0.10 1.00 10.00 tp(ms) t j initial=25c di/dt limitation: 50a/s i tsm i2t i (a), i2t(a2s) tsm fig. 6: non repetitive surge peak on-state current for a sinusoidal pulse with width tp<10ms, and corresponding value of i 2 t. 0 5 10 15 20 25 30 35 40 1 10 100 1000 number of cycles non repetitive t j initial=25c repetitive t c =110c t=20ms one cycle i(a) tsm fig. 5: surge peak on-state current versus number of cycles.
T405Q-600 5/7 0.0 0.5 1.0 1.5 2.0 2.5 3.0 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 tj(c) i gt i h & i l i , i , i [tj] / i , i , i [tj = 25c] gt h l gt h l fig. 7: relative variation of gate trigger current, holding current and latching current versus junc - tion temperature (typical values). 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 0.1 1.0 10.0 (dv/dt)c (v/s) (di/dt)c [(dv/dt)c] / specified (di/dt)c fig. 8: relative variation of critical rate of decrease of main current versus reapplied dv/dt (typical val - ues). 0 1 2 3 4 5 6 7 8 25 50 75 100 125 tj(c) (di/dt)c [tj] / (di/dt)c [tj = 125c] fig. 9: relative variation of critical rate of decrease of main current versus junction temperature. 0 1 2 3 4 5 6 7 8 25 50 75 100 125 tj(c) v d =v r =400v dv/dt [tj] / dv/dt [tj = 125c] fig. 10: relative variation of static dv/dt immunity versus junction temperature. 0 10 20 30 40 50 60 70 80 90 100 02468101214161820 s(cm2) rth(j-a)(c/w) fig. 11: thermal resistance junction to ambient versus copper surface under tab (epoxy printed circuit board fr4, cu = 35m).
6/7 T405Q-600 package mechanical data dpak ref. dimensions millimeters inches min. max min. max. a 2.20 2.40 0.086 0.094 a1 0.90 1.10 0.035 0.043 a2 0.03 0.23 0.001 0.009 b 0.64 0.90 0.025 0.035 b2 5.20 5.40 0.204 0.212 c 0.45 0.60 0.017 0.023 c2 0.48 0.60 0.018 0.023 d 6.00 6.20 0.236 0.244 e 6.40 6.60 0.251 0.259 g 4.40 4.60 0.173 0.181 h 9.35 10.10 0.368 0.397 l2 0.80 typ. 0.031 typ. l4 0.60 1.00 0.023 0.039 v2 0 8 0 8 6.7 6.7 3 3 1.6 1.6 2.3 2.3 footprint
T405Q-600 7/7 information furnished is believed to be accurate and reliable. however, stmicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of stmicroelectronics. specifications mentioned in this publication are subject to change without notice. this publication supersedes and replaces all information previously supplied. stmicroelectronics products are not au - thorized for use as critical components in life support devices or systems without express written approval of stmicroelectronics. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2004 stmicroelectronics - all rights reserved. stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - italy - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states www.st.com package mechanical data ipak h l l1 g b5 b v1 d c a1 a3 a c2 b3 b6 l2 e b2 ref. dimensions millimeters inches min. typ. max. min. typ. max. a 2.2 2.4 0.086 0.094 a1 0.9 1.1 0.035 0.043 a3 0.7 1.3 0.027 0.051 b 0.64 0.9 0.025 0.035 b2 5.2 5.4 0.204 0.212 b3 0.85 0.033 b5 0.3 0.035 b6 0.95 0.037 c 0.45 0.6 0.017 0.023 c2 0.48 0.6 0.019 0.023 d 6 6.2 0.236 0.244 e 6.4 6.6 0.252 0.260 g 4.4 4.6 0.173 0.181 h 15.9 16.3 0.626 0.641 l 9 9.4 0.354 0.370 l1 0.8 1.2 0.031 0.047 l2 0.8 1 0.031 0.039 v1 10 10
|
